Introduction of paper straw machine

Complete operation process of paper straw machine

1. Prepare the paper tape
The paper straw machine manufacturer believes that the cardboard paper that requires the termination of production and processing should be divided into paper tapes of specifications and models with total width, and then various standard total width paper tapes are placed on the paper supply wall, so that the machine equipment will be used afterwards. During the whole running process, the paper tape can be led out through the upper edge of the paper tray, and wound onto the fixed mandrel through the waxing roller.
2. Wipe the cleansing oil on the bottom paper
Afterwards, the bottom paper tape will be rotated with the fixed core axis of the laser cutting head with the inner hole, because the fixed core shaft is in a static state throughout the whole process, so people can lower the paper tape. Follow the friction that occurs in the middle of the rotation, and wipe the bottom layer of paper with an appropriate smoothing oil.
Sharing the complete operation process of the paper straw machine Part 1 Sharing the complete operation process of the paper straw machine Knowledge of hardware tools
Three. Adhesive for paper tape afterwards
Naturally, in addition to the first layer of paper tape that requires wiping and polishing oil, some paper tapes afterwards require the use of some adhesives. In these respects, we require the termination of advance preparation before running the machinery and equipment. Generally, some of the above are selected. The quick-drying organic chemical batter is used as the adhesive in the whole process of the operation of machinery and equipment. Nowadays, glacial acetic acid high-pressure polyethylene is mostly used as the adhesive in machinery and equipment.
Four. Docking of household appliances
After some external props are prepared in advance, people can terminate the access of household appliances to the paper straw machine. After the three-phase power supply is first connected, the full-load test operation of the machinery and equipment can be terminated, and then the motor of the machinery and equipment can be terminated. To terminate the identification of the rotation direction of, be sure to keep it in the proper rotation position. After the high speed is over, people can terminate the conditioning of the resistor on the control board, and let the engine of the machine and equipment start to stop running.
5. Connect and tighten gas pipelines
Because the paper pipette machine generally uses tightening gas to terminate the cutting work of the cutter head, the internal part is completely equipped with all the gas pipelines of the previous weapons and equipment. People only require the additional pneumatic valve to be received. The upper side of the air inlet can be used, and then the required gas working pressure can be terminated for conditioning, so that the paper straw machine can terminate all normal actual operations.